Home > Products > kSA 400 > Hardware -Specifications

Introduction
RHEED Hardware
Features
10-bit Specifications
12-bit Specifications
RHEED Software
Features
Specifications
Acquisition Modes
Analysis Capabilities
General
Plug-in Software Options
Upgrades
Support
Application Notes
References
Product Information Sheets
Product Inquiry
kSA 400 - Leader in Analytical RHEED and LEED
Hardware - Specifications    
Detector - 10-bit Option*

 

 

Progressive scan, interline-transfer, 30 fps (10-bit mode), 60 fps (8-bit mode), IEEE-1394 CCD camera with Firewire adapter card.

  Specifications:
 
Model: K 30FW
CCD format: 1/3" Hyper HAD progressive scan interline-transfer CCD
Pixel resolution: 640 (H) x 480 (V), 7.4 µm x 7.4 µm
Sensing area: 1/3” format
Spectral range: 280-1000 nm
S/N: ≥ 56 dB or better
Sensitivity: 1 lux at F1.4
Exposure time: 1µs – 65 sec.
Output format: 8-bit, 60 fps, or 10-bit, 30fps via IEEE-1394 interface
Lens mount: C-type
Power: 8-30V DC from IEEE-1394 Control Board
Interface: 3-port IEEE-1394 400 Mbps Host PCI adapter
CCD Dimensions: 64 (W) x 64 (H) x 60 (D) mm
Cabling: 10 meter standard Firewire cable
 
  * Optionally, k-Space also supplies 8-bit analog and other 10-bit, and 12-bit digital cameras. These cameras are fully supported and integrated into the kSA 400. Please contact us for details on other CCD cameras.
   
Frame digitization board
 

High-performance Firewire technology supports speeds up to 400 Mbps. Provides three fully compliant cable ports to transmit/receive data at 100/200/400 Mbits/sec.

   
 
Viewport mount kSA 400, RHEED Analysis System, Mounted on an MBE Chamber

Black anodized 6" or 8" o.d. RHEED/LEED flange mount, for mounting and concealing detector and optics. Features removable lid, notch for detector cable, and bottom plate slots for optical rail positioning. Standard 6” and 8” mounts; specific mounts for GENII and Riber systems available. Please specify viewport o.d. and chamber manufacturer.

   

Optics

  • 12mm f/1.4 C-mount lens
  • Lens extension tube set for varying optical magnification without reducing light flux, allowing zoom for quantitative analysis and demagnification for entire screen imaging.
  • Optical rail, rail carrier, post, and post holder for mounting detector and optics.
Cabling
  • Standard Firewire cable, 10m.
Computer (optional)
  • Dell Precision Workstation 380 Desktop Computer
  • 3.4 GHz Processor with 2MB Cache, Pentium 4
  • 800 MHz Front Side Bus
  • 19” Flat Panel Monitor
  • 1GB, 400MHz, Double Data Rate SDRAM, ECC, 2 x 512 Memory
  • 128MB PCIe x 16 ATI FireGL V3100, Dual Monitor VGA or DVI
  • 80 GB, SATA, 7200 RPM Hard Drive
  • 48X CDRW, with Roxio Easy CD Creator
  • Built-in 1394-a Firewire capability
  • MS Windows XP Professional Operating System